Specifications - Sharp XLT300H Operation Manual

„ Cleaning the tape-handling parts
z Dirty heads, capstan or pinch roller can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
z When cleaning the heads, pinch roller, etc., unplug the unit which
contains high voltages.
A
Erase head
Recording/Playback
head
z After long use, the deck's heads and capstan may become mag-
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
„ General
Power source
Power consump-
B
C
D
tion
Dimensions
Weight
Capstan
Pinch roller
„ Amplifier
Output power
Output terminals
Input terminals
02/1/29
AC 230 V, 50 Hz
Power on: 46 W
Power stand-by: 0.6 W
Width: 290 mm (11-7/16")
Height: 130 mm (5-1/8")
Depth: 260 mm (10-1/4")
3.7 kg (8.2 lbs.)
PMPO: 120 W (total)
MPO: 60 W (30 W + 30 W) (DIN 45 324)
RMS: 40 W (20 W + 20 W) (DIN 45 324)
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
CD digital output (optical)
Video/Auxiliary (audio signal): 500 mV/47
kohms
e3.fm
XL-T300H
ENGLISH
E-35