Sharp XLT300H Operation Manual page 36

Sleep and timer operation (continued)
XL-T300H
ENGLISH
This may be operated only with the remote control.
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at
the preset time.
E-30
Setting the clock (See page 11.)
„ Timer playback
Before setting timer:
1 Press the CLOCK button to check that the clock is on time.
2 Load a cassette or disc to be played.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND) or TAPE button to select the
desired function.
When you selected the TUNER, tune in to the desired station.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4
Press the TIMER button and within 6 seconds, press the
MEMORY button.
5
Within 1 minute, press the PRESET ( or ) button to spec-
ify the hour to start, then press the MEMORY button.
02/1/29 e3.fm