Sharp XLT300H Operation Manual page 13

„ Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial
wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM
and GND terminals. Position the AM loop
aerial for optimum reception. Place the
AM loop aerial on a shelf, etc., or attach it
to a stand or a wall with screws (not sup-
plied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception.
Consult your dealer.
External External AM aerial
FM aerial
15 m (49 feet)
7.5 m (25 feet)
Earth rod
Note:
When using an external AM aerial, be sure to keep the wire of the
AM loop aerial connected.
„ Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
black wire to the plus (+) terminal.
Caution:
z Connect the speaker wires to the speakers first, then to the
unit.
z Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
z Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
z Do not let the bare speaker wires touch each other.
Incorrect
„ Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Notes:
z Unplug the unit if it is not to be used for a prolonged period of
AM loop aerial
time.
z Never use a power lead other than the one supplied. Otherwise, a
malfunction or an accident may occur.
02/1/29 e1.fm
XL-T300H
ENGLISH
Incorrect
E-7