Enhancing Your System - Sharp XLT300H Operation Manual

Enhancing your system

XL-T300H
ENGLISH
The connection lead is not included. Purchase a commercially available
lead as shown below.
(CD only)
Red
White
E-32
„ Listening to the playback sounds from
VCR, DVD, etc.
1 Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
AUX IN sockets.
VCR, DVD, etc.
When using video equipment, connect the audio output to this unit
and the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX but-
ton.
To the line
4 Play the VCR, DVD, etc.
output sockets
Note:
To prevent hum interference, place this unit away from a television.
White
Red
„ To record on a tape from VCR etc.
1 Load a cassette into the cassette compartment with the side to be re-
corded on facing up.
2 Press the VIDEO/AUX button.
3 Press the
4 Press the
5 Play back the VCR etc.
„ To record CD signals on MDs
MD recorder
RCA lead
The digital signal from this unit can be recorded by MiniDisc recorders,
etc.
1 Remove the DIGITAL OUT socket cover.
2 Use a connection cable for digital recording to connect the unit to the
OPTICAL IN socket of a MiniDisc recorder, etc.
3 Press the ON/STAND-BY button to turn the power on.
To the optical line
4 Put the MiniDisc recorder, etc. in the recording mode.
input socket
5 Play a CD on this unit.
Notes:
Connection cable
z When using the optical digital socket, remove the cap first. After using
for digital recording
the socket, replace the cap.
z Only CD signals can be output.
02/1/29
button.
( ) button.
e3.fm