Sharp XLT300H Operation Manual page 33

8
Press the ( ) button.
z CD playback will start in a few seconds after the tape starts.
z When the playback of the disc is finished, the CD and the
cassette will stop automatically.
To perform programmed recording:
1 Programme tracks. (See page 15.)
2 Press the button.
3 Press the ( ) button.
To interrupt recording:
Main unit operation:
Press the button.
To resume recording, press the button.
Remote control operation:
Press the button.
To resume recording, press the button.
To stop recording:
Press the button.
The tape will stop. When the button is pressed again, the CD will
stop.
„ Erasing a recorded tape
1. Load the tape to be erased into the cassette compartment.
2. Press the FUNCTION button until "TAPE" appears on the dis-
play.
When operating with the remote control, press the TAPE button.
3. Press the button.
4. Press the ( ) button to start erasing.
Erase-prevention tab of cassette tapes:
z When recording on a cassette
tape, make sure that the erase-
prevention tabs are not re-
moved. Cassettes have remov-
able tabs that prevent
accidental recording or erasing.
Tab of side B
z To protect the recorded sound,
remove the tab after recording.
Cover the tab hole with adhe-
sive tape to record on the tape
without the tab.
02/1/29 e3.fm
XL-T300H
ENGLISH
Side A
Tab of side A
E-27