About Qr Codes And Nfc - SMART kapp Series User Manual

CHAPTER 2
USING YOUR CAPTURE BOARD
Device type Requirements
Android
l
l
l
l
l
l
l
NOTE
Most of the SMART kapp app's features are identical across iOS operating system software and
Android operating systems. However, some features are available for only one of these
operating systems. The remainder of the user's guide highlights these features with the following
icons:
iOS operating system software
When you first connect a mobile device, you're prompted to install an app. You can then use the
app to share notes you have written on your capture board with others.

About QR codes and NFC

As noted in the previous section, you can connect your mobile device to your capture board by
scanning the capture board's QR code or by tapping the capture board's NFC tag.
A QR code is a type of bar code. If your mobile device has a rear-facing camera
l
and a QR code scanning app, you can scan QR codes like the one on your
capture board. Your mobile device then executes the QR codes' commands.
Typically, QR codes' commands display messages or open web pages.
1
Compatible with Bluetooth 3.0 and dual-mode Bluetooth 4.0
11 smarttech.com/kb/170769
Android 4.1 (Jelly Bean) or later
operating system
50 MB of storage (internal or
SD card)
1024 MB of RAM
720p or better screen resolution
1
Bluetooth 2.1 + EDR
NFC (recommended)
3 megapixel or better rear-facing
camera (recommended)
Connection options
Scan the capture board's unique
l
QR code
Tap the capture board's NFC tag
l
Android operating systems