Konica Minolta bizhub PRO 1100 Shortcut Manual page 30

Replacing Waste
Toner Box
If the waste toner box is full [Please
replace waste toner box] message
will display.
1. Open the waste
toner box door, then
draw out the waste
toner box.
2. Remove the label
applied on the waste
toner box, then
apply the label on
the waste toner inlet
to seal it.
3. Insert the new waste
toner box, then close
the waste toner box
door.
更換廢棄碳粉閘
當廢棄碳粉閘碳粉接近滿時，版面會顯
示[請更換廢棄碳粉閘]信息.
30
1. 打開廢棄碳粉閘門,然
後取出廢棄碳粉閘.
2. 把標籤轉貼到廢棄碳
粉閘的頂部，把入口
封好.
3. 把新的廢棄碳粉閘插
入並把門關上.