Status Indication; Status Indication - Advantech ICR-3232 User Manual

5.7.1 Status Indication

There are six LED indicators on the front panel to provide router status information. Each
ETH port has two additional LEDs that provide information about the port status.
Caption
PWR
SIG
DAT
SIM1
SIM2
USR
ETH0
ETH1
ETH0
ETH1
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
Color State
Green On
Green Blinking
Green Fast blinking
Green On
Orange On
Red On
Green Blinking
Green Blinking
Green On
Orange On
Red On
Red Fast blinking
Green Blinking
Green On
Orange On
Red On
Red Fast blinking
Green On / Blinking /
Fast blinking
Green On
Green Off
Yellow On
Yellow Blinking
Yellow Off
Table 5: Status indication
Description
Starting of the router
Router is ready
Updating firmware
Good signal
Fair signal
Poor signal
Communication in progress on radio channel
SIM is selected, router waits for data connection
4G technology
3G technology
2G technology
SIM card problem (missing SIM card or PIN code not
entered)
SIM is selected, router waits for data connection
4G technology
3G technology
2G technology
SIM card problem (missing SIM card or PIN code not
entered)
Function of this LED diode can be selected by user
Selected 100 Mbps
Selected 10 Mbps
The network cable is connected
Data transmission
The network cable is not connected
15
ICR-3232