Advantech ICR-3201 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Network Router
  5. ICR-3201 Series
  6. User manual
Advantech ICR-3201 User Manual

Advantech ICR-3201 User Manual

Lan industrial router
Hide thumbs Also See for ICR-3201:
Table of Contents

Advertisement

Quick Links

Download this manual
LAN Industrial Router
ICR-3201
USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Advantech ICR-3201

Summary of Contents for Advantech ICR-3201

  • Page 1 LAN Industrial Router ICR-3201 USER MANUAL...
  • Page 2 ICR-3201 c 2022 Advantech Czech s.r.o. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photography, recording, or any information storage and retrieval system without written consent. Information in this manual is subject to change without notice, and does not represent a commitment on the part of Advantech.
  • Page 3 Information, notice – Useful tips or information of special interest. GPL license Source codes under GPL license are available at https://icr.advantech.cz/source-code address. Advantech Czech s.r.o., Sokolska 71, 562 04 Usti nad Orlici, Czech Republic Document No. MAN-0050-EN, revision from November 17, 2022. Released in the Czech Republic.

  • Page 4: Table Of Contents

    ICR-3201 Contents 1 Product Overview 1.1 Product Introduction ....... . .
  • Page 5 ICR-3201 Appendix D: Related Documents...
  • Page 6 ICR-3201 List of Figures Hardware Overview of the Router ......Version without WiFi ....... . .
  • Page 7 ICR-3201 List of Tables Hardware Overview of the Router ......Router versions ........

  • Page 8: Product Overview

    1. Product Overview 1.1 Product Introduction ICR-3201 is a LAN industrial router intended for the global market. This router is an ideal device for the realization of a secure connection of two local area networks (LANs). Inter- connection is carried out using two ETHERNET 10/100 interfaces and secure tunnel (IPSec, OpenVPN, L2TP).

  • Page 9: Hardware Overview

    ICR-3201 1.2 Hardware Overview The router case preview is shown in Figure 1. A short description of hardware parts of the router is listed in Table 1, including the links to the chapters with a detailed description. Figure 1: Hardware Overview of the Router...

  • Page 10: Product Versions

    ICR-3201 1.3 Product Versions ICR-3201 router is supplied in the following versions: Router versions Version without WiFi Version with WiFi Table 2: Router versions Figure 2: Version without WiFi Figure 3: Version with WiFi...

  • Page 11: Order Codes

    ICR-3201 1.4 Order Codes Order codes overview is shown in the table below. Product type Product name Order code Features – interfaces ICR-3200 ICR-3201 ICR-3201 LAN router, 2x ETH, 1x BI, 1x BO ICR-3200 ICR-3201 ICR-3201W LAN router, 2x ETH, 1x BI, 1x BO, WiFi Table 3: Order Codes Overview 1.5 Product Revisions...

  • Page 12: Package Contents

    The standard set of router includes items listed in the following table: Item# Description Figure Q’ty 1 pcs ICR-3201 or ICR-3201W router DIN holder 1 set (screwed on the router) Wing for wall mounting 2 pcs (screwed on the router)

  • Page 13: Product Dimensions

    ICR-3201 1.7 Product Dimensions For the dimensions of the product in metal and plastic boxes see the figures below. Note that all sizes are measured in millimeters. Figure 4: Basic dimensions of the router box Figure 5: Basic dimensions of the router box...

  • Page 14: Mounting Recommendations

    ICR-3201 1.8 Mounting Recommendations The router can be placed: on a flat surface, on a wall (or another surface) using the side wings, on a DIN rail EN 60715 with the included metal DIN rail clip. For most applications with a built-in router within a switchboard, it is possible to recognize...

  • Page 15: Wall Mounting

    ICR-3201 1.9 Wall Mounting The wall mounting clip is supplied with the router as standard accessories. The router can be screwed to a wall (or another surface) using the wall mounting clips. Two wall mounting clips are assembled to the router during the production and need to be roteted as shown of Figure 6.

  • Page 16: Din Rail Mounting

    ICR-3201 1.10 DIN Rail Mounting The DIN rail clip is suitable for a DIN rail according to EN 60715 standards. When mounting the DIN rail clip, tighten the screws with max. torque of 0.4 Nm. To remove the router from the DIN rail it is necessary to lightly push down the router so that the bottom part of the DIN rail clip hitched to the DIN rail get out of this rail and then fold out the bottom part of the router away from the DIN rail.

  • Page 17: Product Label

    ICR-3201 1.11 Product Label An example of the product label, with all the information printed on it, is in the figure below. Figure 8: Label Example...

  • Page 18: Hardware Functionality

    ICR-3201 2. Hardware Functionality See Chapter for the product hardware overwiew. Table lists a short description of the hardware, including the links to the chapters with a detailed description. 2.1 Antennas For WiFi models, connect WiFi antennas to the router to WIFI1 and WIFI2 R-SMA connec- tors on the right panel.

  • Page 19: Power Supply

    ICR-3201 2.3 Power Supply Terminal block 3.5 mm. Pin number Signal mark Description VCC(+) Positive pole of DC supply voltage (+9 to +36 V DC) GND(-) Negative pole of DC supply voltage Table 7: Connection of power connector Figure 10: Power connector Power supply for router is required between +9 V to +36 V DC supply.

  • Page 20: Low Power Mode

    ICR-3201 2.4 Low Power Mode In applications requiring low power consumption (such as solar power - not 7/24 mode) is strictly recommended to use LPM mode prior to powering down the entire router. LPM (Low Power Mode) is a router mode where the router is in sleep mode with minimal power consumption;...

  • Page 21: Serial Interfaces And I/O Port

    ICR-3201 2.5 Serial Interfaces and I/O Port The RS232 and RS485 serial interfaces together with the I/O interface are physically con- nected to the 10-pin panel socket. All three interfaces are not isolated from the router. The pinout of this conector is described in the tables below.

  • Page 22: Functional Scheme Of The Binary Interface

    ICR-3201 The functional scheme of connection for the binary input and binary output is drawn on the picture below. Figure 13: Functional scheme of the binary interface...

  • Page 23: Led Status Indication

    ICR-3201 2.6 LED Status Indication There are six LED indicators on the front panel to provide router status information. Each ETH port has two additional LEDs that provide information about the port status. Caption Color State Description Green Starting of the router...

  • Page 24: Reset Functions

    ICR-3201 2.7 Reset Functions Consider creating a router configuration backup before performing the router’s factory reset. The RST button can be used in three different scenarios: Reset: Hold the RST button for less than 4 seconds; the router will reboot, applying its customized configuration.

  • Page 25: First Use

    ICR-3201 3. First Use 3.1 Powering up the Router The router will start up when a power supply is connected to it. The DHCP server will assign an addresses to the devices connected through the Ethernet port ETH0. 3.2 Router Configuration Initial router configuration can be made via a web browser running on your PC.

  • Page 26: Router's Web Interface

    ICR-3201 Figure 15: Router’s Web Interface A detailed description of the router settings in the web interface can be found in the configura- tion manual of the router.

  • Page 27: Technical Parameters

    ICR-3201 4. Technical Parameters 4.1 Basic Parameters Router parameters Temperature range Operating -40 C to +75 C Storage -40 C to +85 C Humidity Operating 0 to 95 % relative humidity non condensing Storage 0 to 95 % relative humidity non condensing...

  • Page 28: Standards And Regulations

    ICR-3201 4.2 Standards and Regulations The router complies with the following standards and regulations: Standards and regulations Radio EN 301 893, EN 300 328 EN 301 489-1, EN 301 489-17, AS/NZS CISPR 32, FCC Part 15 Subpart B, ICES-003 Issue 6, EN 61000-6-2...

  • Page 29: Type Tests And Environmental Conditions

    ICR-3201 4.3 Type Tests and Environmental Conditions Phenomena Test Description Test levels EN 61000-4-2 Enclosure contact 6 kV (crit. A) Enclosure air 8 kV (crit. A) RF field AM EN 61000-4-3 Enclosure 20 V/m (crit. A) modulated (80 – 10000 MHz) 10 V/m (crit.

  • Page 30: Parameters Of Wifi

    ICR-3201 4.4 Parameters of WiFi WiFi Antenna connector 2x R-SMA – 50 (MU-MIMO) Supported WiFi bands 2.412 to 2.472 GHz, 5.180 to 5.825 GHz Standards IEEE: 802.11b, 802.11b+g, 802.11b+g+n, 802.11a, 802.11a+n, 802.11ac 2.4 GHz supported channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13...

  • Page 31: System Configuration

    ICR-3201 4.6 System Configuration Other technical parameters Cortex A8, 1 GHz 2 DMIPS per MHz Flash memory Available memory space 1 862 MB 2x 256 MB – FW 512 MB – User data storage 838 MB – Space for Router Apps...

  • Page 32: Appendix A: Troubleshooting

    ICR-3201 Appendix A: Troubleshooting If you cannot connect to the router from your PC, your network card may be configured in such a way that it is not possible to connect to the router. Take one or more of the following steps in order to solve the problem: Make sure your PC’s network card is configured to obtain the IP address form the...
  • Page 33 ICR-3201 I can’t access my Web server placed behind the router over NAT. The remote HTTP access to the router has to be disabled on "NAT Configuration" page in the router. Also enable "Send all remaining incoming packets to default server"...
  • Page 34 ICR-3201 Serial communication is not working. Verify that the router model supports serial communications. Also verify the serial communication settings. To do so, open the router’s configuration menu via the web browser, select the appropriate "Expansion Port" from "Configuration" part of the menu and verify the settings.

  • Page 35: Appendix B: Customer Support

    ICR-3201 Appendix B: Customer Support Customer Support for Europe Advantech Czech s.r.o. Sokolska 71 562 04, Usti nad Orlici, Czech Republic Phone: +353 91 792444 Fax: +353 91 792445 E-mail: iiotcustomerservice@advantech.eu Web: www.advantech.com Customer Support for NAM Advantech B+B SmartWorx...

  • Page 36: Appendix C: Regulatory & Safety Information

    ICR-3201 Appendix C: Regulatory & Safety Information Safety Notices Please, observe the following instructions: The router must be used in compliance with all applicable international and national laws and in compliance with any special restrictions regulating the utilization of the router in prescribed applications and environments.
  • Page 37 ICR-3201 Product Disposal Instructions The WEEE (Waste Electrical and Electronic Equipment: 2012/19/EU) directive was in- troduced to ensure that electrical/electronic products are recycled using the best available recovery techniques to minimize the environmental impact. This product contains high quality materials and components which can be recycled. At the end of it’s life this pro- duct MUST NOT be mixed with other commercial waste for disposal.
  • Page 38 ICR-3201 Appendix D: Related Documents Quick Start Guide for ICR-3200 Platform Configuration Manual for ICR-3200 Platform [EP] Product-related documents and applications can be obtained on Engineering Portal at address. https://icr.advantech.cz/download...
  • Page 39 ICR-3201 We, Advantech Czech s.r.o., declare that the radio equipment narrated in this user’s manual complies with Radio Equipment Regulations 2017 (S.I. 2017 1206) (WiFi version) and with the Electromagnetic Compatibility Regu- lations 2016 (S.I. 2016 No. 1091 and S.I. 2016 No.

Table of Contents