Advantech ICR-3211 Start Manual
Hide thumbs
Also See for ICR-3211:
- Start manual (8 pages) ,
- Start manual (8 pages) ,
- User manual (44 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Advantech ICR-3211
Summary of Contents for Advantech ICR-3211
- Page 1 Start Guide ICR-3211, ICR-3231 ICR-3232, ICR-3241...
-
Page 2: Start Guide
Start Guide Safety Instructions Please take care to following instructions: Use the router in compliance with national and international law and in compliance with any special or additional restrictions regulating use of the router in the various applica- tions and environments. To avoid possible injury and/or damage to the device, observe the relevant provisions and standards. -
Page 3: Product Disposal Instructions
flash drive medium. If you are interested in obtaining the source, please contact us at: techSupport@advantech-bb.com Modifications and debugging of LGPL-linked executables: The manufacturer of the device hereby grants the right to use debugging techniques (e.g. -
Page 4: First Use
Start Guide First Use Before applying power to the router, connect the components that you required for your applications. You cannot operate the router without connected antenna, inserted SIM card, nor connected power supply. Cross-shaped screwdriver is necessary to insert a SIM card. If you do not have connected main antenna during operation of the router, the router can be damaged! 1. - Page 5 Start Guide Disconnect the router from power supply before handling of the SIM card! 3. Power The router requires an external DC power supply. The DC voltage required is between +9 to +36 V DC. The router has built-in protection against reverse polarity without signaling. Connect the power supply cable to the PWR connector on the front panel of the router (see Figure below).
- Page 6 Start Guide 4. Ethernet An Ethernet cable may be connected to the ETH0 connector on the front panel of the router (see Figure above). By default, the Ethernet port is configured as follows: Connector Purpose Default Setting ETH0 LAN port (default) DHCP Server Connect your laptop or PC to this port to IP Address: 192.168.1.1...
- Page 7 User’s Manual, Configuration Manual and other manuals can be found and downloaded on this web site: www.advantech-bb.cz/download Hereby, Advantech B+B SmartWorx s.r.o. declares that the radio equipment type ICR-3231 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.advantech-bb.cz/eudoc...