Barry-Wehmiller Streamfeeder Value Series Manual page 27

Clearing a Jam
Shutdown
V S V-710iJ M
alue erieS anual
If a jam occurs during operation, follow these steps:
1. Turn the feeder power Off by pushing the circle (O) at the
rocker Power On/Off rocker switch.
2. Remove jammed product from feeder. While doing so, try to
determine the cause of the jam (see Section 5, "Troubleshoot-
ing").
3. Verify whether any adjustments are loose. If so, refer back to
Section 3, "Preparing for Operation", for proper adjustment
procedures.
4. Turn the feeder power back On by pushing the horizontal line
(—) at the Power On/Off rocker switch.
Should you not be using the feeder for long periods of time, follow
these steps to ensure safe and secure storage:
1. Turn the feeder power Off by pushing the circle (O) at the
rocker Power On/Off rocker switch.
2. Disconnect the feeder power cord from the AC power source.
If installed, disconnect external run input from feeder control
panel.
3. Cover the feeder with a cloth or plastic tarp to prevent dust
and debris from accumulating.
21