Table of Contents
Advertisement
Chapter 7. DTE Port Configuration
Physical Layer Options (PHYS LYR OPTS)
Interface Type (INTERFACE)
Select the connector type for the
EIA-232 and V.35.
Bit Rate
Select the operating speed of the
The bit rate selections vary depending on the speed selections made for the
Network
card is required.
TD Clock Source (TD CLOCK SRC)
Set the clock source to I
7-12
PROTOCOL
TRANSPARENT BOP
INTERFACE TYPE
PHYSICAL LAYER OPTIONS
BIT RATE (selections depend on
TD CLOCK SOURCE
TRANSMIT IDLE CODE
HARDWARE FLOW CONTROL
PROTOCOL OPTIONS
DATA FORMAT
ADDRESS TABLE
FAR END PORT NUMBER
OUTGOING DLCI
Figure 7-6. Transparent BOP Menu Tree
port. Also, for rates higher than 56/64 kbps, the External DCE
NTERNAL
Express 5210 User Manual
EIA 232
V.35
N
ETWORK
INTERNAL
EXTERNAL
FLAGS
ONES
OFF
ON
NRZ
NRZI
DTE PORT 1
DTE PORT 2
interface. The choices are
DTE
interface.
DTE
or E
.
XTERNAL
speed setting)
61200208L1-1
Advertisement
Table of Contents
