Table of Contents
Advertisement
Chapter 13. Statistics
Statistics Field
Description
Max Rx Thru
Maximum/average throughput sample in the receive direction for the given interval.
Avg Rx Thru
This is displayed in kbps.
Max Rx Util%
Maximum/average utilization sample in the receive direction for the given interval.
Avg Rx Util%
Utilization is displayed as a percentage of port bandwidth.
Tx Frames
Total frames transmitted.
Tx Bytes
Total bytes transmitted.
Max Tx Thru
Maximum/average throughput sample in the transmit direction for the given interval.
Avg Tx Thru
This is displayed in kbps.
Max Tx Util%
Maximum/average utilization sample in the transmit direction for the given interval.
Avg Tx Util%
Utilization is displayed as a percentage of port bandwidth.
Time in DBU
The amount of time (in seconds) that the DLCI has been in dial backup mode.
PVC IA Time
Time in seconds that the PVC is in the inactive state.
Rx FECN
Number of frames received/transmitted on this port over the specified DLCI with the
Tx FECN
FECN bit of the frame relay header enabled.
Rx BECN
Number of frames received/transmitted on this port over the specified DLCI with the
Tx BECN
BECN bit of the frame relay header enabled.
Rx DE
Number of frames received/transmitted on this port over the specified DLCI with the
Tx DE
discard eligibility (DE) bit of the frame relay header enabled.
Rx CR
Number of frames received/transmitted on this port over the specified DLCI with the
Tx CR
CR bit of the frame relay header enabled.
Lost Frames
Number of frames lost across the PVC. This field is applicable only if the S
N
UMBER
on page 9-8.
Rmt Lost Frames
Number of lost frames reported by the remote Express 5210. This field is applicable
only if the S
Num Checking (SEQ #) on page 9-8.
Rx Burst Seconds
Amount of time (in seconds) that throughput in the receive/transmit direction is greater
Tx Burst Seconds
than CIR.
Min Rx Frame
Size of smallest/largest/average frame received across the DLCI.
Max Rx Frame
Avg Rx Frame
Min Tx Frame
Size of smallest/largest/average frame transmitted across the DLCI.
Max Tx Frame
Avg Tx Frame
Min Frame Delay
Minimum/maximum/average round trip delay of the DLCI. This field is applicable only
Max Frame Delay
if the network port's PVC D
Avg Frame Delay
Delay Measurement (PVC DELAY) on page 9-8.
PVC State
Number of changes in the PVC state.
Change
13-6
C
option is E
HECKING
NABLED
N
C
EQUENCE
UMBER
HECKING
M
ELAY
EASUREMENT
Express 5210 User Manual
. See the section Seq Num Checking (SEQ #)
option is E
. See the section Seq
NABLED
option is E
NABLED
EQUENCE
. See the section
61200208L1-1
Advertisement
Table of Contents
