Dlci Stats - ADTRAN Express 5210 User Manual

Frame relay service unit
Table of Contents

Advertisement

Statistics Field
Description
Signal Error
Number of signal frames received with PVC signaling protocol violations.
Signal T/O
Number of T392 timeouts that have occurred.
Sig State Chg
Number of changes in the signaling protocol state.
Rx Full Status
Number of full status polls received/transmitted on the DTE port.
Tx Full Status
Rx LI Only
Number of link integrity (LI) only polls received/transmitted on the DTE port.
Tx LI Only
Async Status
Number of asynchronous status messages received by the Express 5210.
Discard Frame
Number of frames discarded by the Express 5210 due to bad IP frames received on the
dedicated management DLCI, transmission errors, or link violations.
Rx Overruns
Number of FIFO (first in first out) messages received. The external clock for the network
port is too fast.
DCD Loss
Total times the data carrier detect signal was lost.
Aborts
Number of frames received without a closing flag. This transmission error is also reflect-
ed in the D
CRC Error
Number of frames received with CRC violations. This transmission error is also reflected
in the D
ISCARD
Octet Align
Number of frames received with a bit count that does not fall on 8-bit boundaries. This
transmission error is also reflected in the D
Length Error
Number of frames received with fewer than 5 octets or greater than 4500 octets. This
link violation is also reflected in the D
EA Violation
Number of frames received with an error in the extended address (EA) bit field of the
frame relay header.
Encap Error
Number of frames received on a dedicated management DLCI that have RFC 1490 er-
rors. These errors are also reflected in the D
Inactive DLCI
Number of frames received on an inactive DLCI.
Invalid DLCI
Number of frames received on a DLCI that is out of range. The valid DLCI range is 16-
1007.
Unrouteable
Number of frames received on a DLCI that is not recognized by the unit.

DLCI Stats

Select DLCI S
information on DLCIs related to the Express 5210
statistics given in this menu are described in the following chart:
Statistics Field
Description
Rx Frames
Total frames received.
Rx Bytes
Total bytes received.
61200208L1-1
F
field.
ISCARD
RAME
F
field.
RAME
ISCARD
from the DTE P
TATS
Express 5210 User Manual
Chapter 13. Statistics
F
field.
ISCARD
RAME
F
field.
RAME
F
field.
ISCARD
RAME
menu to access
S
ORT
TATISTICS
DTE
port. The
13-5

Advertisement

Table of Contents
loading

Table of Contents