Remote Fecn Notification (Rem Fecn); Llc2 Options (Llc2 Opts); Llc2 N2 Retry Counters (N2 Retry); Llc2 K Window Size (Wnd Size) - ADTRAN Express 5210 User Manual

Chapter 9. Network Port Configuration
The status of the connection can be viewed in the S
under N
A
CTIVE
The network service provider should recommend the values entered into
the T391, N391, N392, and N393 fields.

Remote FECN Notification (REM FECN)

If set to N
ing remote unit if a frame with the FECN bit enabled is received.
This feature is proprietary and can only be used with ADTRAN
frame relay products on both ends of the virtual circuit.

LLC2 Options (LLC2 OPTS)

The following options appear when LLC2 (Logical Link Control
Type 2) O
menu.

LLC2 N2 Retry Counters (N2 RETRY)

Maximum retries for actions timed by the ACK poll, busy or reflect
timers. When N2 is exceeded, the session resets.

LLC2 k Window Size (WND SIZE)

Maximum number of outstanding unacknowledged data frames
that the LLC2 protocol will allow.

LLC2 Ack Timeout (ACK TO)

Timeout value used by the LLC2 protocol to establish the
maximum time to wait for a positive acknowledgment from a
remote device.

LLC2 Poll Timeout (POLL TO)

Maximum time to wait for a response to a command having the
poll bit set.
9-6
P S
ETWORK ORT IGNALING
again once the threshold is no longer exceeded.
R FECN, the unit notifies its correspond-
OTIFY EMOTE ON
is selected from the N
PTIONS
Express 5210 User Manual
TATISTICS
S . The status will return to
TATE
configuration
P
ETWORK ORT
61200208L1-1
menu