IKEA TRADFRI Manual page 4

http://ikea-club.com.ua
ENGLISH
WIRELESS ON/OFF SWITCH FUNCTIONS
ON/OFF: Press to turn your control outlet
on and off.
Pairing: Add IKEA Smart Lighting products
to your system. See instructions below.
ADDING DEVICES TO YOUR
WIRELESS ON/OFF SWITCH
When the wireless ON/OFF switch is sold
together with a control outlet (in the same
package), they are already paired.
To add more control outlets, just repeat the
steps below:
Make sure that your control outlet is plugged
in and the main power is turned on.
1 Hold the ON/OFF switch close to the control
outlet you want to add (no more than 5 cm
away).
2 Press and hold the pairing button
least 10 seconds , you can find the pairing
button under the rear cover.
3 A red light will shine steadily on the ON/
OFF switch. On your control outlet a white
light will begin to dim and flash one time
to indicate that it has been successfully
paired.
Up to 10 control outlets can be paired with 1
ON/OFF switch.
Make sure to pair them one at a time. If
the control outlets are close to each other,
disconnect those that have already been
paired from the wall outlet.
FACTORY RESET YOUR DEVICE
For wireless ON/OFF switch:
Press the pairing button 4 times within 5
seconds.
CHANGING THE BATTERY
When the wireless ON/OFF switch is used
regularly and as intended, the battery will last
for approximately 2 years.
When it's time to replace the battery, a red
LED indicator will flash when you toggle the
for at ON/OFF switch.
Open the rear cover, and replace the battery
with a new CR2032 battery.
4