Contents Mechanical Scroll Saw DSH/E with electronic speed control ....................6 General Safety Instructions: ..............................7 Additional Safety Instructions ..............................8 Grounding Instructions ................................10 Legend (fig. 1) ..................................10 Description of machine (also see fig. 1a and 1b) ........................10 Technical data ..................................11 Set-up and commissioning of the saw: ..........................11 Unpacking (fig.
Read and understand the entire owners 11. ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses manual before attempting assembly or only have impact resistant lenses, they are NOT safety operation! glasses. 12.
IMPORTANT • When cutting irregularly shaped work pieces, plan your work so it will not pinch the blade. A piece of molding, for example, Additional Safety Instructions For Scroll Saws must lay flat or be held by a fixture or jig that will not let it twist, rock or slip while being cut.
Page 9
to reduce blade breakage and pinching. Support the saw so DO NOT ALTER OR MISUSE TOOL the table is level and the saw does not rock. These Scroll Saws are precision built. Any alteration or modification not specified is misuse and may result in DISCONNECT MACHINE FROM POWER SOURCE BEFORE dangerous conditions.
Grounded, cord-connected tools intended for use on a supply circuit having a nominal rating less than 150 volts: The PROXXON mechanical scroll saw is a very solid and This tool is intended for use on a circuit that has an outlet that robustly designed device.
Failure to do this may result in serious personal injury. The DSH/E saws soft wood up to a thickness of 2", plastic up to 1 1/4" and non-ferrous metals up to 0.4". The saw can also be used without problem for separating 8.1 Unpacking (fig.
2. Clamp saw blade 4! See the corresponding section 8.7.1 of be cut. With Proxxon, there are also various fine toothings, flat these instructions. Caution! Mains plug must not be and round blades, and some with and without cross pin.
undertensioned, the saw blade can lightly crack. Turn knurled – Only use perfect saw blades. button 1 to set the tensioning. If the button is moved to the – Do not let the device operate unsupervised. right (clockwise), the saw blade is more tightly tensioned. If it –...
Round sawing blades (with flat ends) can ideally be used for 1. When sawing, press the work piece onto the work plate, plastic, hard and soft wood. They cut on all sides, so it is not guide by feeling and with little power, more pressure on the necessary to turn the work piece when sawing.
Please use PROXXON accessories. NOTE: The use of CAUTION! improper accessories may cause hazards. Use 5 inch Plain or Pin-end blades. Actually PROXXON Pull the mains plug before making any adjustments, provides: performing maintenance work, or carrying out repairs! Failure to do this may result in serious personal injury.
Page 18
Prox-Tech, Inc., (“Seller”) warrants to the original purchaser only, that all Any implied warranties shall be limited in duration to two years from date of PROXXON consumer power tools will be free from defects in material or purchase. Some states in the U.S. and some Canadian provinces do not workmanship for a period of two years from the date of purchase.
Page 20
Every part has a specific number (5 digit-XX). Please provide us with this number when ordering. For any further information call us toll free at 1-877-PROXXON (1-877-776 9966) or visit us on the web at www.proxxon.com/us. Made in China Distributed in the U.