How To Update Firmware When The Different Network Segment For Ip Address Of The Lra-900-E And Host Pc - ICP DAS USA LRA-900-E Firmware Update

3.2. How to update Firmware when the Different
Network Segment for IP Address of the LRA-900-E
and Host PC.
For example, the first time to get the LRA900-E module, the factory default IP address is
192.168.255.1, but the host PC IP address is 172.17.3.8, refer to the following two methods to
update firmware.
Method 1: Using "Dynamic Host Configuration Protocol (DHCP)"
IP address to LRA-900-E module. Follow the procedure described below:
Step 1:
Run the eSearch Utility to search for any LRA-900-E modules in the network
Step2:
Double click the name of LRA-900-E to open the
Step 3:
Select the "1: ON"
LRA-900-E (Ethernet to LoRa Radio Modem) Firmware Update via Ethernet
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved
option from the "DHCP:"
"Configure Server (UDP)"
drop-down menu and click the
Version 1.0.0
E-mail: service@icpdas.com
to automatically assigns an
dialog box.
"OK" button.
Page：
16