Software Utility; Install The Lra-900 Utility - ICP DAS USA LRA-900 User Manual

3. Software Utility

When users want to change the "Group ID", "LoRa frequency", "Module operation mode" of the
LRA-900, the LRA-900 Utility tool may be needed.

3.1. Install the LRA-900 Utility

Step 1: Get the LRA-900 Utility
The software is located at:
Usbcd:\napdos\rf_modem\utility\lra-900\
http://ftp.icpdas.com/pub/cd/usbcd/napdos/rf_modem/utility/lra-900/
Step 2: Install .NET Framework 3.5 component
The LRA-900 Utility tool requires the ".NET Framework 3.5 components". If your PC's
environment does not has ".NET Framework 3.5 components", it will start to install .NET
Framework 3.5 components from the web site, after executing the "Setup.exe" file.
LRA-900 (RS-232/RS485 to LoRa Radio Modem) User Manual
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved
Version 1.0.1
E-mail: service@icpdas.com
10
Page：