Advertisement
2
Installing Software on Your PC
Install VxComm Utility, which can be obtained
from the web site:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/windows/
3
Configuring Network Settings
1. Double-click the VxComm Utility shortcut on the desktop.
2. Click the "Search Servers" to search your LRA-900-E.
3. Double-click the name of LRA-900-E to open the "Configure Server (UDP)"
dialog box.
Factory Default Settings of LRA-900-E:
IP Address
Subnet Mask
Gateway
Technical support：service@icpdas.com
192.168.255.1
255.255.0.0
192.168.0.1
P3
Advertisement
