Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ICP DAS USA Manuals
  4. Radio Modems
  5. LRA-900-E
  6. Quick start manual

ICP DAS USA LRA-900-E Quick Start Manual

Hide thumbs Also See for LRA-900-E:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
What's in the box?
In addition to this guide, the package includes the following items:
LRA-900-E x 1
Related Information
 Product Page:
http://www.icpdas.com/root/product/solutions/industrial_wireless_communicati
on/wireless_solutions/lra-900-e.html
 Document:
http://ftp.icpdas.com/pub/cd/usbcd/napdos/rf_modem/document/lra-900-e
 Firmware:
http://ftp.icpdas.com/pub/cd/usbcd/napdos/rf_modem/firmware/lra-900-e
Technical support：service@icpdas.com
LRA-900-E Quick Start
ANT-109-01 x 1
v1.0, Sep. 2018
Screw Driver x 1
P1

Advertisement

loading

Related Manuals for ICP DAS USA LRA-900-E

Summary of Contents for ICP DAS USA LRA-900-E

  • Page 1 LRA-900-E Quick Start v1.0, Sep. 2018 What’s in the box? In addition to this guide, the package includes the following items: Screw Driver x 1 LRA-900-E x 1 ANT-109-01 x 1 Related Information  Product Page: http://www.icpdas.com/root/product/solutions/industrial_wireless_communicati on/wireless_solutions/lra-900-e.html  Document: http://ftp.icpdas.com/pub/cd/usbcd/napdos/rf_modem/document/lra-900-e...
  • Page 2 “Search Servers”on Chapter 4 may not work. (Please contact with your system Administrator) 2. Connect both the LRA-900-E and your PC to the same sub network or the same Ethernet switch. 3. Check that the Init/Run switch is in the “Run” position and set the “Device ID”...

  • Page 3: Configuring Network Settings

    Configuring Network Settings 1. Double-click the VxComm Utility shortcut on the desktop. 2. Click the “Search Servers” to search your LRA-900-E. 3. Double-click the name of LRA-900-E to open the “Configure Server (UDP)” dialog box. Factory Default Settings of LRA-900-E: IP Address 192.168.255.1...

  • Page 4: Configuring Virtual Com Port

    4. Contact your Network Administrator to obtain a correct network configuration (such as IP/Mask/Gateway). Enter the network settings and click “OK”. Note:The LRA-900-E will use the new settings 2 seconds later. Configuring Virtual COM Port 1. Wait 2 seconds and click “Search Servers” button again to ensure the LRA-900-E is working well with new configuration.
  • Page 5 3. Click the “Add Server[s]” button. 4. Assign a COM Port number and click “OK” to save your settings. 5. Click on LRA-900-E name and check the virtual COM Port mappings on the Technical support：service@icpdas.com...
  • Page 6 6. Click the “Restart Driver” item in the “Tools” menu to display the “VxComm Utility: Restarting Driver” dialog box. 7. Click the “Restart Driver” button. Note that if you intend to use Internet Explorer, ensure that the cache function is disabled in order to prevent broswer access errors, please disable your Internet Explorer cache as follow: (If you are not using IE browser, please skip this step.) Step 1: Click “Tools”...