Boom Stow Procedure; Securing Unit For Driving - Gradall XL3100V Operators Safety Manual

Boom Stow Procedure

1. With teleboom extended, stow boom in boom rest.
2. Retract telescope boom until the boom position decal is visible in the bottom
smaller hole in the main boom, as illustrated:

Securing Unit for Driving

Drive to and from job site only under the following conditions:
• Position boom in boom rest and secure boom as shown above.
• Mirrors are clean and properly adjusted for visibility.
• Doors and upperstructure windows secured in closed position.
• No load attached to any part of machine.
• Tires inflated to proper pressure.
• Seat belt buckled across lap.
• Drive in accordance with Federal, State, and Local requirements.
• Plan your route.
80884013
https://tractormanualz.com/
Section 3 - Operation
OAC0640
OAC2690
3-35