Table of Contents
Advertisement
Figure 32: WiFi AP configuration
8.2.2.2
WLAN configuration
The page with the configuration of Wi-Fi LAN and DHCP server is displayed by selecting WLAN in the
configuration section.
Table 6: Description of WLAN parameters
Item
Enable WLAN interface
IP Address
Subnet mask
Bridged
Enable dynamic DHCP leases
IP Pool Start
IP Pool End
Lease Time
Wieland Electric GmbH | BA000917 | 08/2021 (Rev. C)
Description
If this item is checked, Wi-Fi LAN is enabled.
Fixed set IP address of Wi-Fi network interface.
IP address of Subnet Mask.
• No – Bridged mode is not allowed. WLAN network is not con-
nected with LAN router.
• Yes – Bridged mode is allowed. WLAN network is connected
with one or more LAN network(s) in router. In this case, the set-
ting of most items in this table is ignored. Instead, it takes set-
ting of selected network interface (LAN).
If this option is checked, dynamic DHCP server is enabled.
Start IP addresses space.
End IP addresses space.
Time in seconds that the client can use IP address.
Wi-Fi module
35
Advertisement
Table of Contents
