Wieland wienet LR77 v2 User Manual page 31

8.2.1.2 DHCP
Information about DHCP server activity can be accessed by selecting the DHCP status item. The
DHCP server provides automatic configuration of devices connected to the network managed by the
router. The DHCP server assigns an IP address, netmask, default gateway (IP address of router) and
DNS server (IP address of router) to each device.
The following table lists description of lines that are displayed in the DHCP status window for each
configuration.
Table 4: Information about lease address
Item
lease
starts
ends
hardware ethernet
uid
Figure 28: Wi-Fi DHCP status
8.2.1.3 Scan
If you want to scan neighboring Wi-Fi networks, press Scan item. Scanning can be performed if the
access point (WiFi AP) is off.
Item
BSS
TSF
freq
beacon interval
capability
signal
last seen
SSID
Supported rates
DS Parameter set
Wieland Electric GmbH | BA000917 | 08/2021 (Rev. C)
Description
Assigned IP address
Time of assignation of IP address
Time of termination IP address validity
Hardware MAC (unique) address
Unique ID
Description
MAC address of access point (AP).
A Timing Synchronization Function (TSF) keeps the timers for all
stations in the same Basic Service Set (BSS) synchronized. All sta-
tions shall maintain a local TSF timer.
Frequency band of access point (AP).
Period of time synchronization [kus] (1,024ms).
List of access point (AP) characteristic.
Signal level of access point (AP).
Last response time of access point (AP).
Identifier for access point (AP).
Supported rates of access point (AP).
The channel on which broadcast access point (AP).
Wi-Fi module
31