Module Configuration; Wi-Fi Status - Wieland wienet LR77 v2 User Manual

Expansion ports
Hide thumbs Also See for wienet LR77 v2:
Table of Contents

Advertisement

8.2

Module configuration

8.2.1

Wi-Fi status

8.2.1.1
WiFi AP
After selecting the WiFi AP item in Status section, information about Wi-Fi access point in the router
and associated stations is displayed.
Table 2: Status information about WiFi AP
Item
hostapd state dump
num_sta
num_sta_non_erp
num_sta_no_short_slot_time
num_sta_no_short_preamble
Furthermore, information is displayed for each connected client (see figure below). Lots of items are
internal information of user module. Usable items are only the following:
Table 3: Status information about Wi-Fi client
Item
STA
AID
Figure 27: Wi-Fi AP status
Wieland Electric GmbH | BA000917 | 08/2021 (Rev. C)
Description
Time stamp of actual Wi-Fi status
Number of associated stations
Number of associated Non-ERP stations (i.e., stations using
802.11b in 802.11g BSS)
Number of associated stations, that do not support Short Slot
Time
Number of associated stations, that do not support Short Pream-
ble.
Description
MAC address of associated station
STA's unique AID (1 ... 2007) or 0 if not yet assigned.
Wi-Fi module
30

Advertisement

Table of Contents
loading

Table of Contents