Hardware Requirements And Precautions - Raidon SafeTANK GT1670 Series User Manual

Front and rear view
A. HDD access light
B. HDD tray key lock
C. HDD tray handle
NOTE:
Please make sure that the product is connected to the host (power on status) before turning
on the power, otherwise the product will be on the sleep mode.

3. Hardware Requirements and Precautions

1. After the hard disk is formatted, the actual total capacity of the GT1670 detected by the computer
operating system will vary from the sum of all hard disk capacities stated by the manufacturer.
2. To prevent data loss, do not remove GT1670 while the system is running.
3. Please always connect the USB cable to the computer to ensure the energy saving function
operating normally.
4. If the GT1670 needs to be shut down or disconnected, please ensure the HDD is safely removed
through your operating system before turning off the power.
5. We strongly recommend backing up important data stored on the GT1670 to another storage
device or a remote site. RAIDON will not be held liable for the damage or loss of data you stored
on the GT1670.
Front View
D. USB 3.1 Gen2 Type-C (10Gbps)
E. Power switch
F. Power socket
2
iTANK GT1670 User Manual
Rear View