Hardware Requirements And Precautions - Raidon SafeTANK GR3660 Series User Manual

Front and rear view
Front View
NOTE:
Please make sure that the product is connected to the host (power on status) before turning
on the power, otherwise the product will be on the sleep mode.

3. Hardware Requirements and Precautions

1. This system can only transfer data to one computer through one interface at a time.
2. After the hard disk is formatted, the actual total capacity of the GR3660 detected by the computer
operating system will vary from the sum of all hard disk capacities stated by the manufacturer.
3. All existing data will be deleted when this product is set up for the first time. Please ensure that all
data on the hard disk has been backed up before installation to avoid data loss.
4. Before a new HDD is installed in the GR3660, please make sure that there are no bad tracks or
defects to avoid data loss.
5. If the GR3660 needs to be shut down or disconnected, please ensure the HDD is safely removed
through your operating system before turning off the power.
6. To prevent data loss, do not remove any of the hard disks while the system is running.
7. Once the system has been initialized, do not switch hard disks around during use. Doing so may
prevent the RAID from being recognized by the system.
8. Once RAID mode has been set up, the switching of hard drives will lead to the removal of data
from the hard disks. Please be sure to backup the data on the hard disk before making any
switches.
9. Please always connect the USB cable to the computer to ensure the energy saving function
operating normally.
10. If the GR3660 needs to be shut down or disconnected, please ensure the HDD is safely removed
through your operating system before turning off the power.
Rear View
J
K
2
iTANK GR3660 User Manual
A. HDD access light
B. HDD tray key lock
C. Tray button
D. HDD enclosure handl
E. Power switch
F. Fan speed switch
G. Power socket
H. RAID switch
I. RESET hole
J. USB 3.2 Gen2 Type-C port
(10Gbps)
K. Fan