Hardware Requirements And Precautions - Raidon SafeTANK GT4670-TB3 User Manual

Front and rear view
Hard Disk
Location 0
Hard Disk
Location 1
Hard Disk
Location 2
Hard Disk
Location 3
A. HDD access light
B. HDD enclosure key lock
C. HDD enclosure button
D. Power status light
E. System status light

3. Hardware Requirements and Precautions

1. This system can only transfer data to one computer through one interface at a time.
2. Please make sure that the hard drives are free from bad blocks or defects prior to installation in
order to avoid system crashes or data loss.
3. Whenever turning off or unplugging the GT4670-TB3 from your computer system becomes
necessary, always remember to safely remove it from your operating system first.
4. When the ST4 is connected to the computer system, it's prohibited to remove, insert or swap the
hard drive while data transfer is being performed.
5. If you will be incorporating either software or hardware RAID functionality to operate with
the GT4670-TB3, it is important to understand the RAID level and its component that will be
incorporated and the precautions to take as each RAID level and component may function
differently and contains various limitations.
6. It is highly recommended for users to back up important data contained within the drives of the
GT4670-TB3 on a regular basis or whenever the user feels necessary to a remote or a separate
storage device. RAIDON will not be responsible for any lost of data caused during the use of the
GT4670-TB3 or the recovery of the data lost.
Front View
Note: A hard disk must be installed at HDD location 0
F. Thunderbolt™ port
G. Mini DisplayPort
H. Anti-theft lock
I. Fan
J. Fan speed switch
Rear View
J
2
GT4670-TB3 User Manual
K. Mute switch
L. Power switch
M. Power socket