Mobile Phone Usage - Sena Momentum SP42 Getting Started

1. Execute Phone Selective Pairing in the Configuration Menu.
2. With your hands-free device in Bluetooth-pairing mode, select Sena Momentum in the list of devices detected.
3. If it asks for a PIN, enter 0000.
2.3.2 Media Selective Pairing – A2DP Profile
1. Execute Media Selective Pairing in the Configuration Menu.
2. With your A2DP device in Bluetooth-pairing mode, select Sena Momentum in the list of devices detected.
3. If it asks for a PIN, enter 0000.

3. MOBILE PHONE USAGE

3.1 Making and Answering Calls
Note: If you have a GPS device connected, you will not hear its voice navigations during a phone call.
3.2 Speed Dialing
3.2.1 Assigning Speed Dial Presets
1. Execute Speed Dial in the Configuration Menu by holding down the Center Button for 10 seconds, then
using the (+) and (-) Buttons to scroll through the menu. Please refer to Section 2.7: "Configuration Menu" for
more details.
2. Tap the (+) Button or the (-) Button to set up the three available Speed Dial Presets. You will hear the voice
prompt, "Speed dial" followed by the preset number.
3. On your mobile phone, call the number to which you want to assign a Speed Dial Preset. The call will be
terminated immediately. Then, you will hear the voice prompt, "Save speed dial (#)." This confirms that the
number was saved.
4. Use this procedure to save other Speed Dial Presets.
5. To exit the menu, tap the (+) Button or the (-) Button until you hear the voice prompt, "Cancel," then tap the
Center Button to confirm.
3.2.2 Using Speed Dial Presets
1. Press and hold the (+) Button for 3 seconds to enter into the Speed Dial menu. You will hear the voice
prompt, "Speed dial."
2. Tap the (+) Button or the (-) Button to navigate between the Speed Dial Presets.
3. To redial the last number called, tap the Center Button when you hear the prompt, "Last number redial."
4. To call one of your Speed Dial Presets, tap the Center Button when you hear the prompt, "Speed dial (#)."