Operation - Stanley PBCC40 User Manual

CHARGE BATTERY
USING THE PBCC40
DO NOT put fingers, hands or other
body parts between the cutting head.
Serious injury will result!
8 ► PBCC40 User Manual

OPERATION

Pressure
Release
4
1
2
Battery Charging
Battery Charged
Hot/Cold Delay
3
Head Pin
1. Set the trigger lock.
2. Insert battery.
3. Fasten the cutting head around the cable.
4. Release the trigger lock. Press and hold
the trigger until the cable is cut. Press
and hold the pressure release to open the
cutting head.
Note: Release the trigger to immediately
stop the tool. Press the pressure release at
any time to open the jaws.