RIOTEC DC9258K Programming Quick Manual

Programming Quick Guide
-DC9258K: Docking Scanner
Docking Scanner:
Gently tap the trigger area at the middle of scanner, to enable the
scanner (for reading barcode)
Up Side
Trigger
Area
The touch sensor area is around middle of the scanner as drawing shown.
Installation
They are Plug &Play USB (HID) devices. When plugged into your Android
OTG devices, it can be recognized as barcode scanner and begin to scan
the barcode. Before using scanner, make sure the smartphone or tablet
is fully charged. Open your APP, they can work as a keyboard input.
Reset Configuration to Default :
If you are unsure of the scanner configuration or have scanned the
incorrect codes, please scan from A for USB HID or B for RS232 or
USB Serial. This will reset the scanner to its factory defaults.
A
Note : Please install PL-2303 driver for USB serial
Keyboard Language
Scan the appropriate country code as below to program the
keyboard layout for your country or language. As a general
rule, the following characters are supported, but need special
Lower Side
care for countries other than the United
@ | $ # { } [ ] = / ' \ < > ~
United states
B
States:
of America German
French French Mac
Norwegian Belgian
Spanish Italian
1
United
Swedish Kingdom
Japan Korean
Finnish Portuguese
1D Symbologies -1
UPC-A/E
ENABLE
JAN/EAN
ENABLE
Code 128
ENABLE
Code 39
ENABLE
Tri-optic
ENABLE
DISABLE
DISABLE
DISABLE
DISABLE
DISABLE