RIOTEC DC9250K Programming Quick Manual

Programming Quick Guide
-DC9250K: Docking Scanner
Docking Scanner:
Gently tap the trigger area at the middle of scanner, to enable the
scanner (for reading barcode)
Up Side
Trigger
Area
The touch sensor area is around middle of the scanner as drawing shown.

Installation

They are Plug &Play USB (HID) devices. When plugged into your Android
OTG devices, it can be recognized as barcode scanner and begin to scan
the barcode. Before using scanner, make sure the smartphone or tablet
is fully charged. Open your APP, they can work as a keyboard input.

Reset Configuration to Defaults

If you are unsure of the scanner configuration or have scanned the
incorrect codes, please from A1 to A14 for USB HID or B1 to B13 for
USB Serial. This will reset the scanner to its factory defaults.
USB HID
A1
A2
A3
Lower Side
A4
A5
A6
RS232/
USB serial
B1
B2
B3
B4
B5
B6
1
A7 B7
A8 B8
A9 B9
A10 B10
A11 B11
A12 B12
A13 B13
A14