Table of Contents
Advertisement
Specifications
The specifications of the Interface Board are as follows.
r Interface Board for HDMI 2 input (Model No.: ET-MDNHM10C)
Compatible slot
Connecting terminal
Resolution
Compatible
signal
Dot clock
frequency
Width
Dimensions
Height
Depth
Weight
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
r Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10C)
Compatible slot
Connecting terminal
Resolution
Compatible
signal
Dot clock
frequency
Width
Dimensions
Height
Depth
Weight
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
Note
f "SLOT NX" is a name of the slot unique to Panasonic supporting the signal input for the 4K
image.
f The video signal that can actually display will vary depending on the display device (projector
or flat panel display) that the Interface Board is installed. For details, refer to the Operating
Instructions of your display device.
Specifications
SLOT NX specification
2 sets, HDMI 19p, HDCP 2.2 compatible, Deep Color
compatible
Moving image signal: 480i
Still image signal: 640 x 400 to 3 840 x 2 400 (non-
interlace)
25 MHz to 594 MHz
151 mm (5-15/16")
38.5 mm (1-17/32")
142 mm (5-19/32")
340 ] (12.0 ozs.)
SLOT NX specification
2 sets, DVI-D 24p, DVI 1.0 compliant (only single link
supported), HDCP compatible
Moving image signal: 480i
Still image signal: 640 x 400 to 1 920 x 1 200 (non-
interlace)
25 MHz to 162 MHz
151 mm (5-15/16")
38.5 mm (1-17/32")
142 mm (5-19/32")
350 ] (12.3 ozs.)
/576i
to 4 096 x 2 160
*1
*1
/576i
to 2 048 x 1 080
*1
*1
ENGLISH - 11
Advertisement
Table of Contents
