Table of Contents
Advertisement
Cleanup and Storage
Cleanup and Storage
Cleaning Sprayer
Cleaning your sprayer with warm water is
required after each use to remove
disinfectant and residues.
1.
Perform Pressure Relief Procedure,
page 4.
2.
Turn Valve Handle clockwise to closed
position.
3.
Remove Sprayer Adapter from sprayer.
Set sprayer on a rag to capture any
disinfectant that may drip.
NOTICE
Disinfectant left in sprayer will damage the
sprayer. To avoid damage, always
completely flush with warm water after
every use. Do not store sprayer with
disinfectant in it.
4.
Follow instructions for Cleanup and
Storage in your sprayer manual.
Cleaning ProPack
At the end of each day's use, clean your
ProPack with warm water to remove all
disinfectant and residue.
1.
Verify Valve Handle is in closed position.
8
2.
Separate Lid from ProPack Tank.
Remove Filter from ProPack Tank.
3.
Pour excess disinfectant into waste
bucket.
3A8304C
Advertisement
Table of Contents
