Bluetooth Out Operation; Bluetooth Operation; Aux-In Operation; Headphone Operation - Victrola THE JOURNEY+ Instruction Manual

The product supports Bluetooth wireless connection (BT OUT). It can be connected
with external Bluetooth-compatible headphones (not included) and Bluetooth
speakers (not included).
1. Power ON the unit by turning the VOLUME CONTROL KNOB clockwise.
2. Turn the FUNCTION KNOB to the BT OUT (Bluetooth Out) position, the red LED
light will begin to flash.
3. Turn ON your external Bluetooth receiver device (such as Bluetooth headphones
and Bluetooth speakers) and set to pairing mode.
4. When pairing is complete, you will hear a chime and the red LED light will stop
flashing. (This may take approximately 15-30 seconds)
5. You are now connected to your external Bluetooth device.
6. Place a vinyl record on the turntable. Then move the tone arm to desired playing
position on the vinyl record and sound will be heard from the external Bluetooth
speaker. (You can ONLY adjust the volume from your external Bluetooth device.)
• Place the Bluetooth device within 1m (3.3') of the product to perform
pairing correctly.
• The product stays in the pairing mode for 30 seconds. If pairing is not properly
completed, follow the above steps again from the beginning after turning all
devices OFF.
• "BT OUT" is only compatible with vinyl record playback. BT OUT will NOT work
in AUX or regular Bluetooth (BT) function modes.
An external device with Bluetooth Connectivity can be wirelessly connected to this
turntable using the Bluetooth function.
1. Power ON the unit by turning the VOLUME CONTROL KNOB clockwise.
2. Turn the FUNCTION KNOB to the BT (Bluetooth
begin to flash.
3. Turn your external device's Bluetooth Setting ON. Wait a moment, then look for
the Bluetooth pairing name "Victrola Journey + ".
4. Select the Bluetooth pairing name, to connect the unit. Once connected, the
blue LED light will stop flashing.
5. You are now connected to your external device via Bluetooth!
6. Rotate the VOLUME CONTROL KNOB to adjust the sound level.
An external (auxiliary) audio source (i.e. personal CD/MP3 Player/Mobile phone or
computer) can be connected to this apparatus via the LINE-IN JACK.
1. Plug a detachable Aux Cable (not provided) into the LINE-IN socket on the
function panel of the apparatus.
2. Turn the FUNCTION KNOB to the LINE-IN position, the LED will turn purple.
3. Plug the other end of the Aux Cable into the Headphone or Line Out socket of
your External Source.
4. Power ON the unit by turning the VOLUME CONTROL KNOB clockwise.
5. Rotate the VOLUME CONTROL KNOB to adjust the sound level.

HEADPHONE OPERATION

Plug the earphone jack into the earphone port on the function panel to listen to the
record. The built-in speaker will stop playing once the earphones are plugged in.
NOTE: For best performance and product maintenance, unplug the turntable when
not in use.

BLUETOOTH OUT OPERATION

BLUETOOTH OPERATION

AUX-IN OPERATION

) position, the blue LED light will
®
6