Introduction And Safety Regulations - Asko T7OO Series Service Manual

https://appliancetechmanuals.com

INTRODUCTION AND SAFETY REGULATIONS

You have in your hand the ASKO Service Manual for
the new generation of dryers that are friendly to the
environment in both their manufacture and use.
T his new generation of dryers has been designed for
ease of servicing. By this we mean that it's a simple
job, for example, to replace a damaged side panel.
T hat's why we've changed the design from a one-
piece casing to a split casing.
To secure parts and wiring, we have replaced many
of the screws by plastic snap fasteners, and certain
parts have integrated ribbon cabling, all for
simplifying service.
We have also integrated service aids, such as hooks
to hang parts on, so that you can use both hands for
installation.
T T T T T H E D I FFEREN T M O D ELS H E D I FFEREN T M O D ELS H E D I FFEREN T M O D ELS
H E D I FFEREN T M O D ELS H E D I FFEREN T M O D ELS
T he table below shows the Model numbers and the
correlating model type:
Model Type
T 700 T D 11 (Mechanical vented)
T 720 T D 22 (Mechanical condensing)
T 760 T D 33 (Electronic vented)
T 780 T D 44 (Electronic condensing)
T 700 is a thermostatically-controlled dryer with air
extraction. T 720 is a timer-controlled dryer with a
condenser.
T 760 is a sensor-controlled electronic dryer with
air extraction. T780 is a sensor-controlled electronic
dryer with a condenser.
T he T 760 and T 780 have a humidity sensor that
can tell when the clothes are dry. On these models
you can choose from eleven languages for the LED
display.
We hope that this Service Manual will be a positive
tool in your daily work. If you have any questions
concerning servicing ASKO products, contact the
ASKO Advisory Center at:
1161 Executive Drive West
Richardson, Texas 75081
972-238-0846
2
G EN ER A L G EN ER A L G EN ER A L
G EN ER A L G EN ER A L
T he electrical and plumbing installations should be
carried out by a qualified electrician and plumber.
Be sure to follow all Federal, State, County and local
codes.
W ARN I N G W ARN I N G W ARN I N G
W ARN I N G W ARN I N G
Always switch off the main electrical power supply
when dismantling and assembling the dryer.
W ARN I N G W ARN I N G W ARN I N G W ARN I N G W ARN I N G
Always use a grounded EMC wristband when
working with electrical components, such as
printed circuit boards and electronic control
units.
T7 2 0 AN D T7 8 0 : TRAN SPO RT/ W I N TER T7 2 0 AN D T7 8 0 : TRAN SPO RT/ W I N TER T7 2 0 AN D T7 8 0 : TRAN SPO RT/ W I N TER T7 2 0 AN D T7 8 0 : TRAN SPO RT/ W I N TER T7 2 0 AN D T7 8 0 : TRAN SPO RT/ W I N TER
STO RAG E STO RAG E
STO RAG E STO RAG E STO RAG E
If the dryer is to be transported or stored for the
winter in unheated premises, make sure the
condensation water tank is empty.
D I SP O SAL D I SP O SAL D I SP O SAL
D I SP O SAL D I SP O SAL
The dryer is manufactured and labelled for recycling.
Contact your local refuge authority to find out how
the dryer should be scrapped and recycled properly.
T his number is normally found in the "City of "
numbers provided in your telephone book.
W ARN I N G W ARN I N G W ARN I N G W ARN I N G W ARN I N G
To prevent children from being accidentally
locked in the drum, the door(s) must be removed
when discarding the dryer.