fantastic furniture Havana Robe 2 Door 1 Drawer Manual page 11

Step 13
You will need
5 x Small Cam
1 x Dowels
(H1)
Nuts (H11)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 1 x Dowel (H1) into the hole of Drawer Front (P15). Insert 5 x Small Cam Nuts (H11)
into Left & Right Drawer Sides (P16&P17), Support Rail (P19) and attach to Drawer
Front (P15) by tightening Cam Nuts with the Phillips Head Screwdriver. Rotate the
cam nuts so the arrows point towards the incoming cam bolts.
Step 14
Slide the Drawer Base (P20) into the grooves of
Left & Right Drawer Sides (P16&P17) as shown.
fantasticfurniture.com.au
(P16)
H11
(P16)
(P19)
H1
(P15)
(P20)
(P17)
H11
Ensure laminated
side of panel is
facing inwards.
(P17)
Page 11
H11