Table of Contents
Advertisement
Hardware Setup
Fan Power Connectors
The board comes with one 2-pin and one 4-pin fan power connector.
The 2-pin fan power connector is marked JP43 on the system board.
To connect, plug the connector to its corresponding pin as shown in
the following figure.
To connect the 4-pin fan power connector, simply plug it into the 4-pin
connector marked JP46 on the system board.
+12V
GND
GND
JP43
2-pin fan power connector (J2)
+5V
+12V
JP46
2-26
User's Guide
Advertisement
Table of Contents
