Table of Contents
Advertisement
Installing Expansion Boards
Install any expansion boards after you have installed the system
board into the housing.
Follow these steps to install an expansion board.
1.
Remove the bracket opposite the slot that you want to use. Save
the cover for future use. Save the screw to secure the expansion
board.
2.
Remove the board from its protective packaging.
3.
Gently insert the golden edge of the board into the slot until it fits
into place.
4.
Secure the board bracket with the screw.
User's Guide
Hardware Setup
Golden
Edge
ISA Slot
Golden Edge
PCI Slot
2-29
Advertisement
Table of Contents
