Changing The Cpu Type - AOpen AP41 User Manual

Changing the CPU Type

You must set jumpers JP11 to JP23 and JP40 according to the CPU
type. The board supports both 5V and 3.45V CPUs. Make sure that
you know your CPU type and its operating voltage before you begin.
Improper setting of jumpers may result in system failure.
5V CPU Type
For Intel processors, you must determine if your CPU is SL-enhanced
or not. To check, simply look for the "&" symbol in the third row on the
lower label of the CPU.
The P24D processor looks very similar to an Intel SL-enhanced CPU
except for the letter "W" in the third row on the lower label of the CPU.
The letter "W" indicates that the CPU supports the write-back mode.
The following figure shows how to determine an Intel SL-enhanced
CPU and a P24D CPU.
SL-ENHANCED
INDICATOR
User's Guide
Hardware Setup
WRITE-BACK MODE
INDICATOR
2-7