Memory Speed (Dram); Cache Speed (Sram); Cpu-To-Pci Memory Post Write Buffer; Cpu-To-Memory Burst Write - AOpen AP41 User Manual

AMI BIOS

Memory Speed (DRAM)

This parameter lets you set the DRAM speed. The supported DRAM
speeds are 70 ns and 60 ns. The default setting is

Cache Speed (SRAM)

This parameter lets you set the SRAM cache speed. The supported
DRAM speeds are 15 ns and 20 ns. The default setting is

CPU-to-PCI Memory Post Write Buffer

Enable this parameter to control the posting of the CPU-to-memory
write data in the posting buffers. Disable the parameter to deactivate
the buffering function.

CPU-to-Memory Burst Write

Enabling this parameter allows the translation of the host cycles into
memory-burst cycles and controls the memory burst-write cycles.
Disabling the function deactivates the memory burst writes.

DRAM Type (Refresh)

This parameter lets you select the DRAM type that you wish to
support. The options are Normal and Low Power. The low-power
DRAMs are special-type DRAMs. The default setting is
Motherboard IDE
To take advantage of the IDE features of the motherboard, you need
to set this parameter to
the feature.
3-18
Enabled . Disable the parameter to bypass
70 ns .
20 ns .
Normal .
User's Guide