Cpu Selection; Cache - AOpen AP41 User Manual

CPU Selection

The available settings for this parameter are Auto, Intel, AMD and
Cyrix. Check your CPU before setting this parameter. Otherwise,
select Auto to automatically configure the CPU. The default setting
is Auto .

Cache

External Cache
This parameter lets you enable or disable the secondary cache. The
default setting is Enabled
troubleshooting a problem.
External Cache Mode
The external cache can be set either to Write-back or Write-through
modes. The Write-back mode is faster than the Write-through mode.
The default is Write-back
Cache Tag Width
This parameter lets you set the cache tag width.
settings are 8-bit and 7-bit. The default setting is
Internal Cache
This parameter lets you enable or disable the internal cache. The
Enabled
default setting is
troubleshooting a problem.
User's Guide
AMI BIOS
Leave it enabled unless you are
.
.
8-bit
Leave it enabled unless you are
.
The available
.
3-11