Table of Contents
Advertisement
This appendix tells how to install the SiS supported drivers using the
installation utility.
DOS, Windows, WFW (Workgroup) and NetWare
To install DOS, Windows, WFW (Workgroup) and NetWare drivers,
simply run INSTALL.EXE.
Windows NT
1. From
the
Windows
Add/Remove SCSI Adapters
Add
2. Select the
button in the SCSI Adapter Setup.
3. From the Adapter: list dialog box, select
a disk from a hardware manufacturer).
4. The Insert Diskette dialog box appears. Insert the SiS driver into
drive A and type
5. The screen displays the Select OEM Option dialog box. Select
SiS 32-bit Local-bus IDE Adapter
OK
.
6. The Select SCSI Adapter Option dialog box appears. Click on
Install
. This installs the drivers to the hard disk.
7. Installation is successful if the SCSI Adpater Setup dialog box
reappears and SiS 32-bit Local-bus IDE Adapter appears on
the list of installed drivers.
8. Reboot the system.
User's Guide
SiS Drivers B
NT
Setup
Options
.
Others (Requires
A:WINNT
.
Appendix
menu,
select
and click on
B-1
Advertisement
Table of Contents
