Power Up Check Point 600 Appliance; Connect Your Check Point 600 Appliance To The Internet - Check Point 600 Quick Start Manual

1

Power Up Check Point 600 Appliance

• Connect the power cable to the power port on the 600 Appliance rear panel.
Plug the power supply unit into a power outlet.
• The Power LED on the front panel will light, indicating that the appliance is
turned on.
• The Notice LED on the front panel will start blinking, indicating the appliance is
booting up. When the Notice LED is turned off, the appliance is ready for login.
2
Connect Your Check Point 600 Appliance
to the Internet
• Connect the included Ethernet cable to the WAN port on the 600 appliance rear
panel and plug it into your external modem or router's PC/LAN network port.
• The WAN Link LED on the front panel will light when connection
is established.