INSTALLATION
●
The kitchen area should be dry and aired and
equipped with efficient ventillation. When
installing the oven, easy access to all control
elements should be ensured.
●
This is a built- in oven, and its back wall and one
side wall can be placed next to a high piece of
furniture or a wall. Coating or veneer used on
fitted furniture must be applied with a heat-
resistant adhesive( 100℃?). This prevents
surface deforma- tion or detachment of the
coating.
●
Make an opening with the dimensions given in
the diagram for the oven to be fitted.
●
Make sure the mains plug is disconnected and
then connect the oven to the mains supply.
●
Insert the oven completely into the open- ing
without allowing the four screws in the places
shown in the diagram to fall out.
ProductDimensionsApertureDimensions
6