Related Manuals for moon W-10
Summary of Contents for moon W-10
- Page 1 W-10 Mono Power Amplifier ___________________________________________________________________________ Owner’s Manual...
-
Page 2: Table Of Contents
MOON W-10 Mono Power Amplifier Table of Contents Congratulations........... 3 Introduction ..........4 Unpacking and Warnings ......5 Installation Tips ........6 Rear Panel ..........7 Connecting the W-10 ........8 Balanced Operation ........9 Operating the W-10 ........10 Custom Installations ......... -
Page 3: Congratulations
Please read this manual thoroughly to acquaint yourself with this product’s features prior to using it. We hope you enjoy listening to the MOON W-10 Mono power amplifier as much as the pride we have taken in creating this fine audio product. We understand the power and emotion of music and build our products with the goal of reproducing these elusive qualities. -
Page 4: Introduction
MOON W-10 Mono Power Amplifier Introduction Your MOON W-10 Mono power amplifier incorporates many significant design features to achieve its “world class” level of performance. This is an abbreviated list of the more important features: Proprietary “Advanced Renaissance” Technology which eliminates feedback. The results are as follows: Real-time amplification is achieved since interactions from the speaker back to the amplifier are virtually eliminated;... -
Page 5: Unpacking And Warnings
Unpacking and Warning! The MOON W-10 Mono power amplifier is a large and heavy component that should be removed from its box with care. We strongly advise that you seek another person to help lift the amplifier out of its box, and place it in its final location. -
Page 6: Installation Tips
These tips will easily scratch most surfaces, therefore it’s advisable to follow these instructions: 1) Place your W-10 on a soft surface (i.e. carpet) and carefully turn it so that it rests on its side. 2) Screw one tip onto each of the four cones. -
Page 7: Rear Panel
(unbalanced) inputs on RCA connectors: one marked “+” and the other marked “-”. The reason for two single-ended RCA connectors is as follows: In the event that you wish to operate the MOON W-10 Mono power amplifier in balanced mode using RCA terminated interconnects. -
Page 8: Connecting The W-10
W-10. In the event that this can’t be avoided, you should ensure that any cables coming into contact with each other are crossed at ninety degree angles to minimize the contact area. -
Page 9: Balanced Operation
Volts. When these two inverted signals on a balanced line are input into a differential power amplifier such as the MOON W-10 Mono power amplifier, any noise picked up by the interconnect will be eliminated since a differential circuit amplifies only the difference between these two signals: Noise on a balanced interconnect will be equal on both conductors and therefore not be processed. -
Page 10: Operating The W-10
DC coming from your preamplifier or a signal sources (ie. CD Player). If your W-10 still doesn’t power up, turn off the main power switch and check the AC fuse. If the fuse appears OK, put it back in its socket and then try to power up again the usual way. -
Page 11: Custom Installations
When the W-10 is powered off, it can be powered on by either the trigger or the push button. When the W-10 is powered on, it can be powered off by the trigger. It can also be powered off by the push button, but only if the trigger isn’t in «on»... -
Page 12: Specifications
MOON W-10 Mono Power Amplifier Specifications Configuration ........... Mono Power Supply Transformers ...... 2 x 1kVA Power Supply Capacitance ......216,000µF Class Of Operation ........A/AB Design ............. Fully Balanced Differential Input Impedance ........47,500 Ω Input Sensitivity ........1080mV Output Device Type ......... -
Page 13: Service And Warranty
In order to prevent any damage during transport, the W-10 must be packed with all of its original internal materials and shipped in the original box. Please keep your box and shipping materials.
Need help?
Do you have a question about the W-10 and is the answer not in the manual?
Questions and answers