Start-Up Via The Service Interface In Order To Assign The Ip Address Statically - Theben TC 649 C Manual

3.3 Start-up via the service interface in order to assign the IP address
statically
You will need two network cables (RJ45 connector) for this type of start-up.
1. Disconnect the TC 649 C from the power supply.
2. Plug network cable 1 into the router.
3. Plug the other end of network cable 1 into the (right-hand) Ethernet socket
on the TC 649 C.
4. Plug network cable 2 into the network socket on your PC.
5. Plug the other end of network cable 2 into the (left-hand) Service socket on
the TC 649 C.
6. Connect the TC 649 C to the power supply.
7. Open the web browser (Google Chrome).
8. Open the web browser and open the following page in the address field:
http://192.168.138.3
9.
10. The login screen will appear.
11. Enter admin as the user name.
Enter admin as the password.
Click on "Log in".
12. Display the IP address of your TC 649 C via Settings  Network settings 
IP address.
13. Untick "Use DHCP", use the pre-filled IP address or enter an IP address of
your choice.
TC 649 C manual
Connecting TC 649 C to the network
13