Connecting Tc 649 C To The Network - Theben TC 649 C Manual

3

Connecting TC 649 C to the network

Depending on which method you use, you will need one or two network cables
(RJ45) to connect the TC 649 C control box to the network.
Make sure the cabling is correct.
 Connect the cables in accordance with the following sections.
There are three ways of carrying out the start-up process for the TC 649 C.
1. Start-up via the hostname (serial number)
2. Start-up via the service interface in order to read out the IP address
3. Start-up via the service interface in order to assign the IP address
statically

Two network cables are required for options 2 and 3.
TC 649 C manual
Connecting TC 649 C to the network
8