Converting Analog Signals Into Digital Signals (Analog-Digital Converter) - Canon mvx1sI Instruction Manual

Digital Signals (Analog-Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.
Connecting the Devices
Turn off all devices before starting the connections. Unload the tape from the camcorder.
Check the type and orientation of the DV terminal and make sure you connect the DV
cable properly. Refer also to the instruction manual of the connected device.
You can also connect a VCR with S (S1)-VIDEO terminal (
Downloaded From VideoCamera-Manual.com Manuals
100
Converting Analog Signals into
MTC-100 Multi
Cable (supplied)
Open the terminal cover
Commercially available DV cable
Signal flow
Signal flow
39).
VIDEO
L
AUDIO
R R
Digital video device
INPUT