Converting Analog Signals Into Digital Signals (Analog-Digital Converter) - Canon ZR100 Instruction Manual

72
Converting Analog Signals into Digital
Signals (Analog..Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.
Turn off all devices before starting the connections. Unload the tape from the camcorder.
Refer also to the instruction manual of the connected device.
Signal flow
q
Commercially available DV cable
PLAY (VCR)
~~~
I
VCR SETUP
I~I
AV'" DV·· ...... OFF
Open the menu and select [VCR SETUP]. Select [AV" DV], set it to [ON]
and close the menu.